Sabatack® 720
Price range: $19.69 through $30.32 GST
Sabatack® 720 is a 1-component, elastic, humidity-curing, MS polymer-based sealant and adhesive. Its primary use is to seal seams, overlaps and joints. Its secondary use is bonding, for which it is easy to apply. Sabatack® 720 has a medium viscosity and a low modulus of elasticity.
Sabatack® 720 is an all-round sealant and basic construction adhesive. Solvent-free, non-sagging, UV-stable, permanently elastic and (air) moisture-curing, based on MS polymer (1-component). Free of hazard symbols, silicones and isocyanates. The product is very easy to apply, odourless, shows hardly any shrinkage, has low sensitivity to blistering and if required, can be painted wet-on-wet.
PRICE IS PER UNIT AND SOLD BY THE CARTON – GREY AVAILABLE BY SPECIAL ORDER
Specifications
- Tensile strength (Fmax) (ISO 37/DIN 53504) = approx. 2.8 N/mm2
- Hardness Shore A (EN ISO 868) = approx. 50
- Elongation at break (ISO 37/DIN 53504) = approx. 140%
- Download the TDS for full product specifications
Benefits
- All-round MS polymer-based sealant and basic construction adhesive
- Sealing of overlapping materials, joints and cracks
- Medium viscosity and easy processing
- Broad bonding spectrum, even without primer
- Open time; approx 14 minutes.
- Suitable for above and below the water line
- Plastic processing may require a primer (recommend compatibility test)
- Can be painted (recommend compatibility test)